Increasingly, consumers want to experience cinema-like look in their house, choosing a home theater projector. These devices allow users to see their conversation in a dark room, with no size limitations of a TV screen. However, since most owners to certify there is something significant maintenance costs associated with this type of system, the cost of the lamp.
Lamp life 2500-4000 hours in a projector, but in someCases, consumers have reported a shorter life span of a few hundred hours. Registered with the replacement lamp for a few hundred dollars, the shorter life of a lamp as an unwelcome surprise. However, buyers should take heart because there are many things they do to ensure their new lamp burns bright, as long as possible.
o Keep the projector can be fixed. The lamp filament is fragile and is vulnerable to damage when it is hot;so no crowds, especially if the unit is still hot, it's important.
or Keep your hands away from the lamp. Bare hands can leave oils on the surface. The oils may be on the surface of the lamp that burns can cause cracking. The use of a tissue or soft cloth when removing / replacing the lamp is wise.
Turn on the lamp or as a result.
Turn on the lamp, or about 5 minutes before turning off the projector. This allows the fan to cool the device.
Because of the rotation orWith regard to stress the filament with the sudden increase in voltage, you should avoid turning on and off unnecessarily, if they have a brief pause for reflection. The use of "soft start" can be useful if the projector.
or, an automatic standby be useful to ensure that the lamp is not burned accidentally left the display on the opposite side.
o Keep clean and fresh. Projectors should be accommodated to ensure that they are not near sources of heat and haveadequate ventilation. It should not be hindered their intake or exhaust vent. The filter should be cleaned every 3-6 months and has changed for the manufacturer's guidelines for good air circulation to ensure and protect the lamp dust.
As with any source of light, the lamp in a projector in the end fail and need replacing. However, the proper use and maintenance to help ensure that the projector lamp to realize its full life expectancy, rather than placing unnecessaryBurden on the budget of the owner.
No comments:
Post a Comment